Honda Aluminum Body Repair in Louisville, KY
Oxmoor Collision Center is a Honda certified body shop. When your Honda has damaged aluminum parts, we repair or replace them exactly as Honda’s body repair procedures say. Call 502-423-3980 or get a free estimate.
How Honda handles aluminum repairs
Many current Honda models use aluminum for the hood, bumper beams and some structural and suspension parts. Honda does not run a separate aluminum certification. Its certified program covers training, required tools and Honda’s repair procedures for every material.
Honda allows some aluminum parts, such as hoods, to be repaired only by shops with a dedicated aluminum repair area and separate tools. Other aluminum parts, such as bumper beams and steering hanger beams, must not be repaired and are replaced. Aluminum die-cast suspension damper housings are replaced as an assembly.
What qualifies Oxmoor Collision Center
- Member of the Honda and Acura Certified Collision program. See our Honda certified body shop page.
- Separate aluminum work area, aluminum tools and aluminum-trained technicians. We hold aluminum certifications from Ford, Audi, Porsche and Jaguar Land Rover. See certified aluminum repair.
- Genuine Honda parts when a part must be replaced, and pre- and post-repair scans.
Training and equipment
- Training: Oxmoor Collision Center is an I-CAR Gold Class shop with I-CAR Platinum and ASE-certified technicians.
- Separate aluminum work area: Aluminum is repaired away from steel work, with its own tools and dust extraction, so steel dust can’t contaminate aluminum and cause corrosion.
- Measuring and structure: Computerized laser measuring and 4 frame machines with Car-O-Liner frame alignment. You get printouts of your vehicle’s specifications.
- Procedures: Every repair follows Honda’s published repair procedures, including whether a part may be repaired or must be replaced.
- Paint and warranty: 3 down-draft paint booths with expert color matching, backed by our limited lifetime warranty for as long as you own the vehicle.
Get a free Honda aluminum repair estimate
Oxmoor Collision Center is at 11505 Electron Dr, Louisville, KY 40299. We serve St. Matthews, Lyndon, Middletown and Jeffersontown. Free estimates, no appointment needed. Enterprise rentals and insurance adjusters are on site. If your vehicle can’t be driven, call our 24-hour towing line at (502) 955-5955.
Call 502-423-3980
Mon-Fri 7:30 AM-6:00 PM | Sat 8:00 AM-12:00 PM | Sun closed
Get a free Honda repair estimate
Honda aluminum repair FAQ
Is there a Honda aluminum certification?
No. Honda certifies collision shops through the Honda and Acura Certified Collision program. Oxmoor Collision Center is a member, and we follow Honda’s procedures for aluminum parts.
Can you repair a dented aluminum Honda hood?
Often, yes. Honda allows aluminum hood repair in a dedicated aluminum area with separate tools, which we have. If the damage is too severe, we replace it with a genuine Honda hood.
Which Honda aluminum parts must be replaced?
Honda says aluminum bumper beams and steering hanger beams must not be repaired, and aluminum die-cast damper housings are replaced as an assembly.
Will you repair my aluminum panel or replace it?
It depends on the part and the damage. We follow the carmaker’s repair procedures for your exact vehicle. Some aluminum panels can be repaired with aluminum dent tools. Others, including many structural parts, must be replaced with genuine parts. We explain which and why on your estimate.
Can I choose Oxmoor Collision Center if my insurer suggests another shop?
Yes. You choose where your vehicle is repaired. We work with all major insurance companies and handle the claim paperwork. See our insurance partners.
Oxmoor Collision Center
11505 Electron Dr, Louisville, KY 40299 · 502-423-3980
Mon – Fri 7:30 AM – 6:00 PM · Sat 8:00 AM – 12:00 PM · Sun Closed · Get Directions
